Diesel Resistant Heat Shrink Tubing
Insutek KDR-150 resistant heat shrink tubing is made from irradiation cross-linked special flexible elastomeric compounds. It is particularly suitable to be applied to resistance of aviation and diesel fuels, hydraulic fluids and lubrication oils, chemical solvents etc. It is ideal to protect cables, wiring harness, connectors, especially in military and aerospace area.
Insutek KDR-150 resistant heat shrink tubing is made from irradiation cross-linked special flexible elastomeric compounds. It is particularly suitable to be applied to resistance of aviation and diesel fuels, hydraulic fluids and lubrication oils, chemical solvents etc. It is ideal to protect cables, wiring harness, connectors, especially in military and aerospace area.
Features/Benefits
Shrink Ratio: 2:1
Resistant to oil, diesel and hydraulic fluids.
Flexible and flame retardant
Rohs and Reach compliant
Operating Temperature Range
Operating temperature range: -75℃~150℃
Minimum shrink temperature: 150℃
Standards/Approvals
UL224, 150℃ 600V VW-1
|
Property |
Requirement |
Test Method |
Typical Value |
|
Longitudinal Shrink Ratio |
≤10% |
ASTM D 2671 |
≤5% |
|
Tensile Strength |
11.7MPa min. |
ASTM D 638 |
≥14 MPa |
|
Elongation at break |
200% min. |
ASTM D 638 |
≥400% |
|
Tensile Strength after aging 150℃,168 hour |
10.3MPa |
ASTM D 638 |
≥12 MPa |
|
Elongation after aging 150℃,168 hour |
200% min. |
ASTM D 2671 |
≥300% |
|
Heat Shock 200℃,4h |
No Cracking |
ASTM D 2671 |
Pass |
|
Cold Bend -65℃,4h |
No Cracking |
ASTM D 2671 |
Pass |
|
Voltage Wistand |
2500V,60sec,no breakdown |
ASTM D 2671 |
Pass |
|
Dielectric Strength |
11.9 KV/mm min. |
ASTM D 2671 |
≥15 KV/mm |
|
Volume Resistivity |
109Ω·cm min. |
ASTM D 876 |
≥1010Ω·cm |
|
Corrosion |
no corrosion |
ASTM D 2671 |
Pass |
|
Flame retardant |
VW-1 |
ASTM D 2671 |
Pass |
|
Size |
Before Shrink (mm) |
Full Recovery (mm) |
|||
|
mm |
Inch |
ID |
Wall Thickness |
ID |
Wall Thickness |
|
Ф2.4 |
3/32 |
2.6±0.2 |
0.25±0.05 |
≤1.2 |
0.51±0.08 |
|
Ф3.2 |
1/8 |
3.8±0.2 |
0.45±0.08 |
≤1.6 |
0.76±0.15 |
|
Ф4.8 |
3/16 |
5.3±0.5 |
0.45±0.08 |
≤2.4 |
0.84±0.15 |
|
Ф6.4 |
1/4 |
7.0±0.5 |
0.5±0.10 |
≤3.2 |
0.89±0.15 |
|
Ф9.5 |
3/8 |
10.0±0.5 |
0.55±0.10 |
≤4.8 |
1.02±0.20 |
|
Ф12.7 |
1/2 |
13.2±0.5 |
0.6±0.10 |
≤6.4 |
1.22±0.20 |
|
Ф19.1 |
3/4 |
21±1.0 |
0.70±0.15 |
≤9.5 |
1.45±0.28 |
|
Ф25.4 |
1 |
26.5±1.0 |
0.85±0.15 |
≤12.7 |
1.78±0.28 |
|
Ф38.1 |
1-1/2 |
41±1.0 |
1.0±0.2 |
≤19.1 |
2.41±0.41 |
|
Ф50 |
2 |
52±1.5 |
1.2±0.20 |
≤25.4 |
2.79±0.41 |
