Heat Shrink End Caps
Insutek KSEC series of Heat Shrink End Caps is made from radiated polyolefin with inner adhesive layer, it has great excellent water resistance performance, and mainly used to seal cable ends and provide Mechanical & Environmental protection.
Insutek KSEC series of Heat Shrink End Caps is made from radiated polyolefin with inner adhesive layer, it has great excellent water resistance performance, and mainly used to seal cable ends and provide Mechanical & Environmental protection.
Features:
Operating temperature range: -55ºC (-67ºF) to 110ºC (230ºF)
Shrinking temperature minimum of 121ºC (250ºF)
|
Properties |
Test Method |
Typical Value |
|
Tensile strength |
ASTM D 2671 |
12MPa min. |
|
Ultimate elongation |
ASTM D 2671 |
200% min. |
|
Volume resistivity |
IEC 93 |
1014Ω.cm min. |
|
Dielectric strength |
IEC 60243 |
12kV/mm(1.0mm) min. |
|
Water absorption |
ISO 62 |
0.5% max. |
|
Heat shock at 225℃/4hrs |
ASTM D 2671 |
No cracking, dropping |
|
Density |
ASTM D 792 |
1.0~1.1g/cm3 |
|
Size |
As supplied(mm) |
After recovered(mm) |
||||
|
(mm) |
D*(Min.) |
L*(±10%) |
A*(±10%) |
d*(±10%) |
l*(±10%) |
Dw(±10%) |
|
12/4 |
12 |
38 |
15 |
4 |
40 |
2.6 |
|
14/5 |
14 |
45 |
18 |
5 |
42 |
2.2 |
|
20/6 |
20 |
65 |
25 |
6 |
55 |
2.5 |
|
25/8.5 |
25 |
75 |
30 |
8.5 |
65 |
2.5 |
|
35/16 |
35 |
92 |
35 |
16 |
83 |
3.3 |
|
40/15 |
40 |
95 |
40 |
15 |
75 |
3.3 |
|
55/26 |
55 |
114 |
50 |
26 |
105 |
3.5 |
|
75/36 |
75 |
132 |
55 |
36 |
115 |
4.2 |
|
100/52 |
100 |
153 |
70 |
52 |
130 |
5 |
|
120/60 |
120 |
155 |
70 |
60 |
150 |
5 |
|
145/60 |
145 |
160 |
70 |
60 |
150 |
5 |
|
160/82 |
160 |
160 |
70 |
82 |
133 |
4.5 |
|
200/90 |
200 |
170 |
70 |
90 |
145 |
4.5 |
